
Which laid scrim suits your application? With the new product advisor, BAFATEX adds an interactive tool to the website launched in July: manufacturers can now configure a BAFA® laid scrim themselves, thread by thread – and the enquiry goes straight to the BAFATEX team in Wipperfürth.
The product advisor guides users through six steps: thread orientation, longitudinal threads, diagonal threads, finish, contact details, and review and send. A BAFA® scrim consists of longitudinal threads and two crossing diagonal layers that are bonded together without weaving. The first step is therefore to define the thread orientation; the yarns for warp and diagonals and the finish are selected next.
The thread orientation of a BAFA® scrim is described with two numbers, for example 180/15:
As a starting point, the product advisor offers common standard configurations: light (100/20), balanced (180/15) and longitudinally strong (300/30).
When choosing yarns, each yarn is listed with its fineness in dtex (decitex). The unit describes the weight of a yarn relative to its length: 1 dtex equals 1 gram per 10,000 metres of yarn. A polyester filament yarn of 1,100 dtex therefore weighs 1,100 grams over 10 kilometres. The higher the dtex value, the thicker and usually the stronger the yarn – and the heavier the scrim. The standard range includes glass and polyester filament yarns and viscose; on request, natural fibres such as cotton, flax and hemp as well as high-performance fibres such as carbon, Kevlar and NOMEX are also possible.
With every input, a preview of the scrim updates in a 10 × 10 cm section. At the same time, the product advisor calculates the key figures: tensile strength lengthwise and crosswise, elongation at break, yarn weight per area and thread spacing. These are based on a calculated strength in a strip tensile test analogous to DIN EN ISO 13934, using the yarn manufacturers’ data. The values are non-binding and do not replace testing of the finished product – but they provide quick, reliable guidance.
Once the configuration is complete, it is sent directly to BAFATEX together with the contact details. The team reviews the requirements, fine-tunes yarn, thread orientation and width, and provides samples for testing in the customer’s own process. Try the product advisor now.